Emerging Caddis Pupa (fall coat)
Tying instructions:
- Wrap hook shank from eye to a position over the Barb with thread.
- Tie in wire rib.
- Tie in rear body dubbing and dub body. Stop 1/3 from the eye.
- Work back toward the bend ¼ of an inch and build up a thorax.
- Spiral wrap wire rib and tie off in front of Thorax.
- Tie in wings one per side slope slightly up at the rear.
- Tie in the Antennae. Slope them back toward the hook bend. Let the antennae extend ½ an inch past the hook bend.
- Use a dubbing loop and dub the section in front of the thorax using, natural hare saddle fur. Try to keep the hare fur Spiky.